Turntable Belts
Page: 1 2 3 > >> View All (25)
Turntable Belt Length
If you are unable to find your system or manufacturer listed below check out the overall length of the belt fitted and you should be able to find the belt you require. Select the nearest length, if you are unable to find the exact length (as belts stretch slightly with use and age) choose the nearest shorter length. All belt sizes given are approximate and may vary.
To check drive belt length for most Japanese type full platter decks remove mat and lift platter off centre spindle (remove circlip if fitted), turn platter over and measure the circumference of the drive hub and deduct 5-10mm to determine correct length and tension. Fit the new belt onto the drive hub and replace the platter then hook the belt over the drive pulley through the inspection hole in the platter before replacing the mat. The drive hub circumference can also be calculated by its diameter D using the equation D x 3.142 (Pi).
The process for split platter transcription type decks is similar except in this case the outer section only needs to be lifted off and the measurement then taken around the drive hub and motor. The correct belt length can then be determined by deducting 5% of the measured dimension which generally equates to 20-30mm less than the measured dimension to ensure correct tension for the new belt.
Turntable Belt TB58 Ref T5715 - total length 183mm, width 3mm
Turntable Belt TB58 Ref T5715 - total length 183mm, width 3mm
Total Price: £11.00
Quantity:-
1
+in stock
Turntable drive belt length 183 mm (58.5 diameter, 91.5 flat) x 3 x 0.6 mm compatible with Alphason Super Nova
Turntable Belt TB60 Ref T5717 - total length 187 width 5 mm
Turntable Belt TB60 Ref T5717 - total length 187 width 5 mm
Total Price: £10.00
Quantity:-
1
+in stock
Turntable drive belt length 187 mm (59.5 diameter, approx 30 flat) x 5 x 0.65 mm
Thorens TD124 Turntable Belt - length 320mm Original Part 6800581
Thorens TD124 Turntable Belt - length 320mm Original Part 6800581
Total Price: £29.00
Quantity:-
1
+in stock
Thorens original turntable drive belt Part No. 6800581 - length 320mm x 0.9 x 6 flat compatible with Thorens Turntable TD124.
Turntable Belt TB105 2mm Round Ref T5786 - total length 329.7
Turntable Belt TB105 2mm Round Ref T5786 - total length 329.7
Total Price: £20.00
Quantity:-
1
+in stock
Turntable drive belt 2 mm round, diameter 105 mm, length 329.7 mm compatible with Rega turntables
Turntable Belt TB108 Ref T5627 - total length 339 mm
Turntable Belt TB108 Ref T5627 - total length 339 mm
Total Price: £12.00
Quantity:-
1
+in stock
Turntable drive belt length 339 mm (108 diameter, 169.5 folded) x 5 x 0.6 mm compatible with Dual CS505-1, CS505-3
Turntable Belt TB121 - total length 380mm
Turntable Belt TB121 - total length 380mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 380mm (121 diameter, 190 flat) x 5 x 0.7mm compatible with BSR (all models), Dual CS505-4
Turntable Belt TB138 - total length 434mm
Turntable Belt TB138 - total length 434mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 434mm (diameter 138, 217 flat) x 5 x 0.7mm compatible with Akai ACM55, Garrard (all models except 35SB), Walker CJ61, Sony HMK40K
Thorens TD180 Turntable Belt - length 450mm Original Part 6800582
Thorens TD180 Turntable Belt - length 450mm Original Part 6800582
Total Price: £29.00
Quantity:-
1
+out of stock
Thorens original turntable drive beltPart No. 6800582 - length 450mm x 0.9 x 4 flat compatible with Thorens Turntable TD180.
Turntable Belt TB158 - total length 496mm
Turntable Belt TB158 - total length 496mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 496 mm (158 diameter, 238 flat) x 5 x 0.7mm compatible with Systemdeck I, IIx900
Turntable Belt TB160 Ref T5662 - total length 502 width 4 mm
Turntable Belt TB160 Ref T5662 - total length 502 width 4 mm
Total Price: £17.00
Quantity:-
1
+in stock
Turntable drive belt length 502 mm (160 diameter, 80 flat) x 4 x 0.8 mm compatible with Dual 5120, CS410, CS415, CS430, CS435, CS435-1, CS455, CS503.1, Hitachi 503L, Marantz TT42, Manticore Mantra, NAD 1520, Pro-Ject Debut, Systemdeck Transcription,
Turntable Belt TB160 Ref T5635 - total length 502 mm
Turntable Belt TB160 Ref T5635 - total length 502 mm
Total Price: £12.00
Quantity:-
1
+in stock
Turntable drive belt length 502.4 mm (160 diameter, 251 flat) x 5 x 0.7 mm
Turntable Belt TB162 Ref T5701 - Total Length 508 Width 4 mm
Turntable Belt TB162 Ref T5701 - Total Length 508 Width 4 mm
Total Price: £22.00
Quantity:-
1
+in stock
Turntable drive belt length 508 mm (161.8 diameter, 81 flat) x 4 x 0.8 mm compatible with Thorens TD105, TD106, TD107, TD108, TD109, TD110, TD111, TD112, TD113, TD114, TD115, TD125, TD126, TD127, TD146, TD147, TD150, TD158, TD160, TD161, TD162, TD163, TD164, TD165, TD166, TD170, TD190, TD240, TD280 MkI-III, TD290, TD295 MkI-IV, TD316, TD317, TD318, TD319, TD320, TD321, TD325, TD520, TD521, Concreto 2001, Concreto 3001
urntable Belts
Page: << < 1 2 3 > >> View All (25)
Thorens Original Turntable Belt 510mm - 0.9 x 4mm flat Part 6800574
Thorens Original Turntable Belt 510mm - 0.9 x 4mm flat Part 6800574
Total Price: £25.00
Quantity:-
1
+out of stock
Thorens original turntable drive belt Part No. 6800574 - length 510mm x 0.9 x 4 flat compatible with Thorens Turntables TD105, TD106, TD107, TD108, TD109, TD110, TD111, TD112, TD113, TD114, TD115, TD125, TD126, TD127, TD146, TD147, TD150, TD158, TD160, TD161, TD162, TD163, TD164, TD165, TD166, TD170, TD190, TD240, TD280 MkI-III, TD290, TD295 MkI-IV, TD316, TD317, TD318, TD319, TD320, TD321, TD325, TD520, TD521, Concreto 2001, Concreto 3001
Turntable Belt TB166 - total length 522mm
Turntable Belt TB166 - total length 522mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable Belt 166 x 5 x 0.7 mm compatible with Akai AP590, Ariston RD110, Dual CS504, CS505-5, Systemdeck II, III, Sneider 6011P, Walker CJ55
Turntable Belt TB172 - total length 540mm
Turntable Belt TB172 - total length 540mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 540mm (diameter 172, 270 flat) x 5 x 0.7mm compatible with Dual CS1241, CS1242, CS1245, CS2110, CS503-2
Turntable Belt TB173 Ref T5664 - Total Length 542 Width 4mm
Turntable Belt TB173 Ref T5664 - Total Length 542 Width 4mm
Total Price: £20.00
Quantity:-
1
+in stock
Turntable drive belt length 542 mm (173 diameter, 276.6 flat) 4 mm wide compatible with Pioneer PL200Z, PL335, PLJ110, PLJ210, PLJ230, PLJ440, PLJ500, PLX340, PLX350, PLZ81, PLZ82, PLZ91, PLZ92, PLZ93, PLZ94, PLZ95, PLZ460
Turntable Belt TB176 - total length 553mm
Turntable Belt TB176 - total length 553mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 553 mm (176 diameter, 276.5 flat) x 5 x 0.7mm compatible with Akai APA305, APM512, Alphason Sonata, Ariston Q Deck, Dual 506, CS506, JVC ALE11, Kenwood/Trio P26, Linn Axis, Sondek, Sanyo DCX802, DCX891, Sony HMK-V102, XO-101, PSJ10, Philips FCD563/35, Logic DM101, Philips FCD563, Soundlab G056F
Turntable Belt TB181 Ref T5792 - total length 569 mm, width 3.17 mm
Turntable Belt TB181 Ref T5792 - total length 569 mm, width 3.17 mm
Total Price: £20.00
Quantity:-
1
+in stock
Turntable drive belt FB1812B length 569 mm (181 diameter, 284.5 flat) x 3.17 x 0.6 mm
Turntable Belt TB185 - total length 581mm
Turntable Belt TB185 - total length 581mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 581 mm (185 diameter, 290.5 flat) x 5 x 0.7mm compatible with Akai APMX550, APMX570, Kenwood/Trio P100, National Panasonic (Technics) - most models including SLBD20, SLJ110R, excluding SL3, SL19, SLB2, SLB210, SLBD22, SLL20 ,SLN5) and those models mentioned elsewhere, Panasonic SGV04, SGV06, Rotel RP850, Sansui SR222 MkIV), Sherwood PS9700, Voyd Valdi, Philips FP362-05R, Pioneer PL225, PL333
Turntable Belt TB189 - total length 594mm
Turntable Belt TB189 - total length 594mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 594 mm (189 diameter, 297 flat) x 5 x 0.7mm compatible with Akai APMX570, Grundig PS1700, JVC (except ALE11, LA10, LA11, LA21, LA100, LA110, LA120, LAX1), Mitsubishi X7, Pioneer C4500 (A), C4600, C5600, C5600A (D), E1000A, ES2000, FD3, KH3355, KH3500, KH5522 (A), M6000, M6500, MS6500, MX40, MX80, PL2, PL10, PL12 (X), PL12A, PL12AC, PL12E, PL12M, PL12R, PL12S (X), PL15, PL15A, PL15C, PL15D, PL15D II, PL15R, PL25D, PL31D, PL61, PL100, PL100 (X) R, PL100X, PL112D, PL115D, PL117D, PL120, PL155A, PL155E, PL220, PL230, PL330, PL340, PL466, PL512, PL512 (XD), PL512X, PL514, PL514 (A,XD), PL514X, PL515, PL516, PL516 (X), PL516X, PL518 (XD), PL2200, PL2300, PL2400, PL2600, PLA20, PLA25, PLA30, PLA35 (D), PLA45 (D), Prelude 4000(A), Prelude 600, Prelude 700, Rondo 2000, Rondo 3000, Rondo 3000X, S50, S550, S770
Turntable Belt TB195 - total length 612mm
Turntable Belt TB195 - total length 612mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 612 mm (195 diameter, 306 flat) x 5 x 0.7mm compatible with A & R XE, Aiwa LX20, Akai APM600, APM630, Hitachi HT12, HT20S, HT324, HTL33, HTMD28, JVC LA21, LA110, LA120, KAM (all models), Kenwood / Trio 4033TT, JP2021, KD37R, KD48F, KD49F, KD1033, KD1500, KD1600 MkII, KD2033, KD2055, KD2500, KD3033, KD3055, KP2021, KP3021, KP3022, KP3125, KR2035, Marantz TT520, Micro Seiki MR-311, Pioneer PL12AC, PL12D, Rotel RP310, RP855, RP900, RP970, Sherwood PM8550, PM9800, Skytec (all models), Sony (most including HMK70, HMP70, JJ500, PSLX45P, PS-LX300USB excluding HP511A, HP610, HMK40K, PSJ10, XD101), Soundlab (except DLP1600/G056), National Panasonic (Technics) SL3, SL19, SLB2, SLB210, SLBD21, SLBD22, SLL20 ,SLN5, Trio KD1033/1500, Yamaha P220/320
Turntable Belt TB201 - total length 631mm
Turntable Belt TB201 - total length 631mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 631mm (diameter 201, 315.5 flat) x 5 x 0.7mm compatible with Aiwa PX30, PXE855, PXE860, Akai APA1, Goldring Lenco GL60, Hitachi HTG2, JVC LAX1, LA10, LA11, LA100, LA420, Panasonic (Technics) SGV06, Pioneer PL100X, PL512X, PL514, PL516X, PLA45D, Rotel RP830, RP1100, RP1300, RP3300, Sansui SR1050C,SR2050C, Sanyo (some models please check length of old belt), Fishers, Sharp (some older music centres - check length), Sony HP511A, Soundlab DLP1600, GO56 (some - check drive sub-platter diameter)
Turntable Belt TB205 - total length 644mm
Turntable Belt TB205 - total length 644mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 644mm (diameter 205, 322 flat) x 5 x 0.7mm compatible with Aiwa PXXE800, PXE850, Z2300, Akai AP001, AP005, AP103, APM11, CEC AP-003, BD2000, BD2200, BD5200, BD7000, ST100, ST510, Dual CS750, 5000, Kenwood KD68F, Micro Seiki MB10, Numark TTUSB (Other Numark turntables PT01, TT1510, TT1600, TT1610, TT1700 - check size before ordering), Pioneer PL512X, PL516X, PLA45D, Rotel RP500, RP820, Sansui (all models except SR1050C, SR2050C, SR222 Mk IV), Sanyo 1020, GXT7000, TPM15, Sharp (most models - check length), Toshiba SR300 also compatible with other Toshiba models please check dimensions.
Turntable Belt TB210 - total length 660mm
Turntable Belt TB210 - total length 660mm
Total Price: £8.00
Quantity:-
1
+in stock
Turntable drive belt length 660mm (diameter 210, 330 flat) x 5 x 0.7mm compatible with Aiwa PXE10, PXE30, AP2100K, APD35K, Akai AP003, AP-B10C, APB110, APM3, Audio Technica AT-LP60BT, AT-LP60USB, B & O Beogram 550, Dual CS5000, Eagle D2006, Hitachi (except T503L, HT12, HT20S, HTL33, HTG2 and those listed elsewhere), Leak 3001, Marantz 6025, TT151, Realistic Lab 1500, Sanyo DXT5500K, G1005, G2002, G2003, G3001, G3002, G3003, G4002, SX7015UM, TP240, TP266, TP600A, Sony HP610, PS-HX500
Page: << < 1 2 3 > >> View All (25)
Online Catalogue | Turntable Belts
Turntable Belts
Page: << < 1 2 3 View All (25)
Turntable Belt TB270 Ref T5648 - total length 847 mm
Turntable Belt TB270 Ref T5648 - total length 847 mm
Total Price: £26.00
Quantity:-
1
+in stock
Turntable drive belt FR270 length 847 mm (270 diameter, 423.5 flat) x 5 x 0.8 mm compatible with Sonab 85N
Page: << < 1 2 3 View All (25)
留言列表
